Xplorer guitar has a ripped cord at the worst possible area.

**activeskater66** · Joined: 06 Mar 2008 Posts: 52 Location: Mooresville, NC

I just got back from vacation and i came home to my Xplorer being ripped by my cat at the worst possible spot.

Can anyone help me?
_________________

**Fannypack** · Joined: 03 Apr 2008 Posts: 840 Location: concentration camp

How bigs the rip

Solder mabye?
_________________

Anyone want to 1v1 quickscopes/noscopes on mw2 (360) add my gt JesusHellz

**Friedmannn** · Joined: 30 Mar 2008 Posts: 842

Close up pics would be nice.

**activeskater66** · Joined: 06 Mar 2008 Posts: 52 Location: Mooresville, NC

I don't have my camera with me at the moment but i will try to get those close up pics as soon as I can.

Edit: Got them but I had a hard time getting focus on my camera on such a close up thing but you can see where the rip is and everything.

_________________

**acdcrulz1980** · Joined: 20 Apr 2007 Posts: 32

does it still work? cause i have a rip in the same place but mine still works fine

**UltimateP3** · Joined: 08 Jul 2008 Posts: 143

Just cut that part and solder the rest, or buy a new cable from www.guitarheroparts.com

**activeskater66** · Joined: 06 Mar 2008 Posts: 52 Location: Mooresville, NC

It worked for like 15 mins. and then I must have bent the wire the wrong way and ripped it because now it wont work unless I am pressing the two ends of the wire together.
_________________

**lygallday1212** · Joined: 20 Jan 2008 Posts: 419 Location: Lancaster,CA

**IWillKickU** · Joined: 06 Dec 2007 Posts: 2830 Location: In the Undertow

You basically just need to strip the wires back, twist (and/or solder) them back together, wrap them in electrical tape, and your done. If you can't get a good connection becacuse the boot's in the way, you can buy a new chord from www.guitarheroparts.com.

**Squirrel** · Posted: Wed Nov 12, 2008 6:11 pm Post subject:

If you can solder, that's a super easy fix.

I'd say I'd fix it, but you could get a new cord cheaper from the site.
_________________

**activeskater66** · Joined: 06 Mar 2008 Posts: 52 Location: Mooresville, NC

Yea I can solder but how would i strip the dense rubber part of the wire.
_________________