Select Button

**carrymehome22** · Joined: 15 Jan 2007 Posts: 21

Well, my select button was broken for sometime now, i opened up my guitar and it seemed fine to my knowledge, (don't know much about the wiring). Anyone have a solution?

**AlCapwned** · Joined: 11 Oct 2006 Posts: 149

There should be a set of 3 wires going to the Start/Select circuit board. Are either of the end ones damages or not contacting on either side of the connections?

**carrymehome22** · Joined: 15 Jan 2007 Posts: 21

they're connected at all ends, seems to be intact

**CarryOn** · Joined: 07 Mar 2007 Posts: 1

try to post some pictures and I'll see if I can help.

**carrymehome22** · Joined: 15 Jan 2007 Posts: 21

i put the arrows there to show they're connected

**Porksword** · Joined: 04 Mar 2007 Posts: 16

Select Button doesnt matter, after all, TRUE guitar heroes use the tilt sensor.

**trofl** · Joined: 26 Apr 2006 Posts: 1297 Location: Ames, IA

**Porksword** · Joined: 04 Mar 2007 Posts: 16

Haha, I was kidding around so take a chill pill and...

C H I L L A X.

**JY0913** · Posted: Sat Mar 10, 2007 4:07 am Post subject:

try cleaning the contacts of the buttons using a rubber eraser. if that doesnt work, solder a new wire for the select button and cut a notch somewhere in the old one.