The 360 LP Tilt Sensor Adjustment / Disable Guide - UPDATED

**ccmoose** · Joined: 26 Jun 2007 Posts: 1170 Location: Houston, TX

What if i super glue the wire in place instead of soldering it there?
_________________

**ccmoose** · Joined: 26 Jun 2007 Posts: 1170 Location: Houston, TX

HELP!!! I got the soldering done, but the up, down, and A (a.k.a. strum bar and green button) aren't registering anymore.
_________________

**Scottster21** · Joined: 28 Dec 2009 Posts: 1 Location: KCMO

Has anyone done this mod on a Logitech Guitar? Any info would be greatly appreciated.

Thanks,

Scott
_________________

**yksi-kaksi-kolme** · Joined: 22 Jun 2008 Posts: 2803 Location: philly skramzzzz

Best solution ever. Every time I tried to tap anything, the damn tilt sensor went off... I went into this thinking it would be really hard, but it actually wasn't. I can barely solder worth shit, and yet this still wasn't difficult to do at all. Of course there's a huge glob of solder over the 6g diodes and I burned the logic board within like a 3mm radius of the contact points, but it still works! If I can do it, I'm pretty sure anyone can with enough patience... and of course, light (it was damn hard to see so I had to use my iPhone's LED). Thanks for this, having SP always go off was incredibly frustrating but now I never have to worry about that anymore.
_________________

My Accomplishments - GH | RB || My Youtube Channel || My Customs

**redbrickhut** · Joined: 01 Mar 2008 Posts: 14

So this might be a dumb question.. but why exactly can't i just destroy the tilt sensor if i want to disable it?